CHEMTEK SC-86 Rust and Scale Remover

Attribute:

SKU : Rust, scale, and corrosion remover, 20 liters in size.

Categories : Top Products

Share

Product Features

  • Quickly removes rust and scale, saving time and reducing the risk of ignition.
  • Effectively removes thick layers of rust.
  • Dissolves rust and scale by breaking them down into a solution with water.
  • Contains inhibitors to prevent corrosion, protecting metals such as iron, brass, bronze, rubber seals, and plastics.
  • Can be diluted with water up to 4 times depending on the thickness of the rust and scale.
  • Application methods include immersion or using a rotating pump.

 

Used with the following machinery

          

            

 

 
instruction

Rotating pump

  • Mixing the Solution: Prepare the CHEMTEK SC-86 solution by mixing it with water in a ratio of 1:4. This means for every part of CHEMTEK SC-86, use 4 parts of water.
  • Connecting to the Rotating Pump: Connect the rotating pump to the machinery or equipment that needs cleaning.
  • Circulating the Solution: Start the rotating pump to circulate the CHEMTEK SC-86 solution throughout the equipment. Let it circulate for 2-3 hours to allow the solution to effectively dissolve rust and scale. If the solution loses effectiveness during this time, consider replenishing it with fresh solution.
  • Rinsing with Clean Water: After the circulation period, rinse the equipment thoroughly with clean water until all residues of the cleaning solution are removed.

 

            

spray cleaning
  • Mixing the Solution: Prepare the CHEMTEK SC-86 solution by mixing it with water in a ratio of 1:5. This means for every part of CHEMTEK SC-86, use 5 parts of water.
  • Spraying: Use a spray tank to apply the diluted CHEMTEK SC-86 solution evenly over the entire surface area that needs cleaning.
  • Foaming and Dissolving: As you spray, you may notice foaming occurring as the CHEMTEK SC-86 interacts with rust. Allow the solution to dissolve the rust completely.
  • Rinsing: After the rust has dissolved and the cleaning action is complete, rinse the surface thoroughly with clean water to remove any remaining residue.High-Pressure
  • Washing: For more stubborn residues or thorough cleaning, you can use a high-pressure washer to rinse off the CHEMTEK SC-86 solution effectively.

 

     

 

Cleaning the rotating parts in a cooling tower and evaporative condenser involves several

  • To reduce the water level in the tray of the Cooling Tower and Evaporative Condenser by approximately 20%Add CHEMTEK SC-86 solution to the tray in a ratio of 1 part CHEMTEK SC-86 to 4 parts water in the system.
  • Turn off the fan of the machine and turn on the water pump. Allow the system to circulate for 1-2 hours. If the solution loses effectiveness, add more.
  • Drain the water from the system.
  • Refill the system with fresh water and circulate for 10-15 minutes, approximately 2 rounds.Refill the system with fresh water and operate the machine normally.
     
     
     
     

 

      

 

 Video demonstrating the effectiveness of CHEMTEK SC-86

 

 

 

 

 

 
  

 
  
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Powered by MakeWebEasy.com
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  and  นโยบายคุกกี้